Condition: New
เพลทยึดคอกีตาร์เฟนเดอร์วินเทจ 70's style set
Genuine Fender 3 bolt neck micro tilt adjust mounting bolt.
This bolt goes in the lower location in the '70s style 3-bolt neck plate.
ในชุดประกอบด้วย
1-Fender 70s Chrome Neck Plate. Part Number : 005-4525-000
1-Fender 3-Bolt, Micro Tilt Neck Adjustment Screw. 1/4-28x1-9/16. Part Number : 001-2156-000.
2-Fender 8 X 1-3/4" neck mounting screws Part Number : 0..
Condition: New
เพลทยึดคอกีตาร์ Fender®American DeluxeGenuine Fender American Deluxe Guitar 4-Bolt Neck PlateFender Part No. 0059209000Chrome-plated four-screw neck plate for use on American Deluxe series guitars manufactured from 2004-present. Rounded for contoured-heel design, with Micro-Tilt™ adjustment hole.Mounting hardware not included.FEATURESChrome-plated four-screw neck plateRounded for contoured-heel designMicro-Tilt™ adjustment holeStamped "Fender Corona California"No-Ser..
Condition: New
เพลทยึดคอกีตาร์เฟนเดอร์อเมริกันสแตนดาร์ด-อเมริกันดีลักซ์สีเงินGenuine Fender 4-Bolt American Series Guitar Neck Plate With "Fender Corona" StampFender Part No. 0991445100Neck plate stamped with "Fender® Corona California" and including hole for Micro-Tilt™ neck-tilt adjustment. Fits most Fender guitars using four-screw neck mounting with Micro-Tilt. Mounting hardware included.FEATURES4-bolt mountStamped "Fender® Corona, California"Mounting screws includedFor most Fende..
Condition: New
เพลทยึดคอกีตาร์เฟนเดอร์วินเทจ 70sGenuine Fender 4-Bolt '70s Vintage-Style F Logo Neck PlateFender Part No. 09914481001970s vintage-style neck plate with engraved "F" logo, for use on most Fender guitars and basses using four-screw neck mounting without Micro-Tilt™ adjustment. Mounting screws included.FEATURES1970s vintage-style neck plateEngraved "F" logoMounting screws includedFor most Fender guitars and basses with four-screw neck mounting and no Micro-Tilt adjust..
Condition: New
เพลทยึดคอกีตาร์เฟนเดอร์วินเทจ No Logo
Genuine Fender 4-Bolt Vintage-Style Neck Plate No LogoFender Part No. 0991447200Vintage-style neck plate for use on most U.S.- and Mexico-made Fender guitars and basses using four-screw neck mounting without Micro-Tilt™ adjustment. Mounting screws included.FEATURESVintage-style 4-bolt neck plateNo logo or serial numberMounting screws includedFor most U.S.- and Mexico-made Fender guitars and basses with four-screw neck moun..
Condition: New
เพลทยึดคอกีตาร์เฟนเดอร์วินเทจ No Logo
Genuine Fender 4-Bolt Vintage Style Neck Plate No LogoFender Part No. 0991447100Vintage-style neck plate for use on most U.S.- and Mexico-made Fender guitars and basses using four-screw neck mounting without Micro-Tilt™ adjustment. Mounting screws included.FEATURESVintage-style 4-bolt neck plateNo logo or serial numberMounting screws includedFor most U.S.- and Mexico-made Fender guitars and basses with four-screw neck moun..
Condition: New
เพลทยึดคอกีตาร์เฟนเดอร์Genuine Fender 4-Bolt American Series Bass Neck PlateFender Part No. 0991446100Neck plate stamped with "Fender® Corona California," for use on most Fender basses using four-screw neck mounting without Micro-Tilt™ adjustment.Mounting screws included.FEATURES4-bolt mountStamped "Fender® Corona, California"Mounting screws includedFor most Fender basses using four-screw neck mounting without Micro-Tilt adjustmentMade in USAข้อมูลสินค้าเพิ่มเติมจากเว็บFe..
Condition: New
เฟรทกีต้าร์เฟนเดอร์จัมโบ้
Fender Strat Tele Guitar Jumbo Fret Wire 24 Pack
Genuine Fender Part : 0991999000
Fender® jumbo guitar fret wire is pre-cut in 24-piece quantities pre-radiused to 12".
Measurements: .055" tall, .090" wide. Each piece is cut for guitar fingerboards.Narrow Tall? Medium Jumbo? Fret Sizes Explained6230: The smallest fret wire found on older Fender necks (.078″ x .043″). Fender Vintage6150: Vinta..
Condition: New
เฟรทกีต้าร์เฟนเดอร์วินเทจ
Fender Strat Tele Guitar Vintage Fret Wire 24 Pack
Genuine Fender Part 0992014000
Fender® vintage-style guitar fret wire is pre-cut in 24-piece quantities pre-radiused to 7.25".
Measurements: .045" tall, .083" wide. Cut for guitar fingerboards.
6150: Vintage jumbo. Much wider but not as tall as 6230 (.102″ x .042″).
ข้อมูลจากเว็ปไซต์เฟนเดอร์ Narrow Tall? Medium Jumbo? Fret..
Condition: New
เฟรทกีต้าร์เฟนเดอร์มิเดียมจัมโบ้
Fender Strat Tele Guitar Medium Jumbo Fret Wire 24 Pack
Genuine Fender Part 0991998000
Fender® standard guitar fret wire is pre-cut in 24-piece quantities pre-radiused to 9.5".
Measurements: .046" tall, .103" wide. Cut for guitar fingerboards.
6130: Medium jumbo (.106″ x .036″).
Narrow Tall? Medium Jumbo? Fret Sizes Explained6230: The smallest fret wire found on old..
Condition: New
เฟรตเบสเฟนเดอร์มิเดียมจัมโบ้
Genuine Fender Vintage-Style Bass Frets 24Fender Part Number : 0992015000FeaturesOfficial Fender Vintage Style Bass Fret Wire ready to installPack of 24 pieces for 1 entire fretboardRadiused to 7.25"Made in the USATech SpecsCrown Height: 1 mm (0.039")Crown Width: 2.1 mm (0.084")Length (approximate): 70 mm (2.8")https://shop.fender.com/en/intl/parts/miscellaneous/standard-bass-frets-medium-jumbo-24/0991997000.html*..
Condition: New
เฟรตเบสเฟนเดอร์มิเดียมจัมโบ้
Genuine Fender Standard Bass Frets (Medium Jumbo) (24)Fender Part Number : 0991997000REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSStandard bass guitar fret wire pre-cut into 24 pieces and pre-radiused to 9.5".FEATURES24 pre-cut standard frets for 4-string bass fingerboardsPre-radiused to 9.5"Each piece .046" tall and .103 widehttps://shop.fender.com/en/intl/parts/miscellaneous/standard-bass-frets-medium-jumbo-24/09919970..
Condition: Newเหล็กรองบอดี้กีตาร์เฟนเดอร์ 70s Fender Tilt Disk Upper NeckGenuine Fender Parts No.0084699049Genuine Fender® '70s Style 3 Bolt Neck Micro-Tilt Adjust Upper Disk for Guitar BodyMade in USA.
..